Jetta Sedan L5-2.5L (CBTA) (2009)
-
Install hood lock - 1 - in lock carrier - 3 -.
Tightening specifications for bolts - 4 -: 12 Nm
-
Connect harness connector - 5 - for Front Hood Switch (F266) and clip line on lock carrier - 3 -.
-
Install release - 2 -. Refer to --> [ Disconnecting Hood Release Cable ] See: Service and Repair/Disconnecting Hood Release Cable.
-
Adjust hood lock.
‹› Before the hood is closed, a function test of the operating lever and release must be performed.