Jetta Sedan L5-2.5L (CBTA) (2009)
Scuff Plate: Service and Repair
Sill Panel Trim
Sill Panel Trim
Sill Panel Trim
‹› Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the
same manner.
Removing
-
Remove side upholstery:
‹› with rear side airbags, refer to--> [ Side Upholstery with Side Airbag ] See: Seats/Service and Repair/Rear Seats.
‹› without rear side airbags, refer to--> [ Side Upholstery without Side Airbag ] See: Seats/Service and Repair/Rear Seats.
Sedan
-
Remove wheelhousing trim. Refer to --> [ Wheel Housing Trim, Sedan ].See: Wheel Housing Trim, Sedan
Wagon
-
Remove wheelhousing trim. Refer to --> [ Wheel Housing Trim, Wagon ]. See: Wheel Housing Trim, Wagon
All vehicles
-
Pull sill panel trim out of front sill panel and door seal piping.
-
Remove guide - 1 - from lower B-pillar trim.
-
Pull sill panel trim out of rear sill panel and door seal piping.
-
Remove guide - 2 - from lower B-pillar trim.
-
Open strap - 3 - and feed seat belt through it.
‹› Before installing, check securing clips for damage and replace if necessary.