Jetta Sedan L5-2.5L (CBTA) (2009)
Seat Back: Service and Repair
Rear Seat Backrest
Rear Seats
Backrest
Removing
Sedan
-
Remove seat bench. Refer to--> [ Seat Bench, Sedan ] See: Service and Repair/Rear Seats/Seat Bench, Sedan.
Wagon
-
Fold the bench seat forward.
All vehicles
-
Fold back floor carpet in area of center backrest bearing - 4 -.
-
If present, remove the trim - 1 - from the center backrest bearing.
-
Remove bolt - 2 - (9 Nm).
-
Remove clamp - 3 - from center backrest bearing.
-
Lift out right backrest - 5 - from center backrest bearing and pull backrest off pin - 6 -.
-
Remove bolt - 8 - (40 Nm) and remove belt buckle - 9 - from floor.
-
Remove right backrest from vehicle.
-
Lift out left backrest - 7 - from center backrest bearing and pull backrest off pin.