Jetta Sedan L5-2.5L (CBTA) (2009)
-
Roll backrest cover upward.
-
Using a small screwdriver, unclip profiles - 4 - for backrest cover out of mounts - 5 - in upholstery.
-
Roll cover upward further.
-
Unclip profiles of cover out of mounts in upholstery.
‹› For the sake of illustration, backrest cover is depicted as partially removed in the illustration.
-
Cut upholstery clips - 1 -. Upholstery clips must be replaced during installation.
-
Disengage tension wire - 2 - on both sides from upholstery wire - 3 -.
-
Remove the cover and upholstery - 4 - from the backrest frame - 5 -.