Jetta Sedan L5-2.5L (CBTA) (2009)
Sunroof / Moonroof Weatherstrip: Adjustments
Sunroof with Glass Panel
Adjusting Panel Seal
-
Using a strip of cardboard about 0.3 mm thick (e.g. business card), check if pretension between panel seal - 2 - and body is even all around.
‹› Cardboard should slide through gap with firm resistance.
If this is not the case:
-
Removing glass panel for sunroof, refer to --> [ Sunroof with Glass Panel ] See: Roof and Associated Components/Sunroof / Moonroof/Service
and Repair/Removal and Replacement/Sunroof With Glass Panel.
-
If pretension is insufficient, the panel seal - 2 - can be pressed open using a trim removal wedge (3409) - 1 -.
-
If pre-tension is too high, press panel seal - 1 - together all around using application roller for door insulation foil (3356).