Jetta Sedan L5-2.5L (CBTA) (2009)
/Page-787005.png)
-
Release and disconnect the connector from the control module in - direction of arrow -.
-
Install the (VAG 1869/2).
-
Attach the bleeder hose from the bleeder bottles to the left front and left rear brake caliper bleeder valves and open the bleeder valves.
-
Operate the brake pedal using (VAG 1869/2) at least 60 mm.
-
Close the left front and left rear bleeder valves.
-
Do not remove the (VAG 1869/2).
-
Place sufficient lint free cloths under the control module and hydraulic unit.
Make sure that brake fluid does not come in contact with the terminals.
-
First mark both brake lines for the master cylinder - A - and - B - and remove them from the hydraulic unit.
