Jetta Sedan L5-2.5L (CBTA) (2009)
Oil Pan: Service and Repair
Lower Oil Pan
Lower Oil Pan
Special tools, testers and auxiliary items required
‹› Torque wrench 5-50 Nm (V.A.G 1331)
‹› Hand drill with plastic brush attachment
‹› Protective eyewear
‹› Silicone sealant (D 174 003 A2)
Removing
-
Remove the noise insulation..
-
Drain the engine oil.
‹› Observe disposal regulations!
-
Remove the bolts.
-
Pry off the lower oil pan at the lift out pockets provided - arrows - on the upper oil pan. Be careful not to damage the sealing surfaces in the
process.
-
Replace the damaged lower oil pan.
Installing
CAUTION!
To prevent injuries from shavings, wear protective goggles and protective clothing.
-
Remove the remainder of sealant from the upper and lower oil pans e.g. using a rotating plastic brush.
CAUTION!
Make sure that no sealant residue enters the engine.
-
Clean the sealing surfaces so they are completely free of any oil or grease.
-
Cut the tube nozzle at the front marking (diameter of nozzle approximately 1 mm).