Jetta Sedan L5-2.5L (CBTA) (2009)
-
Remove the wiring harness - 3 - from transport strap.
-
Pull the clamps - 4 - and retaining ring - 5 - out of the locking mechanism.
-
Remove the bolts - 7 - and remove the transport strap.
-
Remove the throttle valve control module. Refer to--> [ Throttle Valve Control Module ] See: Powertrain Management/Fuel Delivery and Air
Induction/Relays and Modules - Fuel Delivery and Air Induction/Variable Induction Control Module/Service and Repair. The coolant hoses
remain attached.
-
Disconnect the electrical connector - 1 - and hose for the crankcase ventilation - 3 -.
-
Remove the wiring harness - 2 -. To do so, carefully press off clips - arrows -.
-
Pull the oil dipstick out - 1 - and press retaining ring - 4 - downward.