Jetta Sedan L5-2.5L (CBTA) (2009)
-
Insert a drift - 1 - into the bore of the lower part of the (3364).
-
Using the drift as a lever on the (3364) and pull out the valve stem oil seal in - direction of arrow -.
Installing
-
Place the plastic sleeve - A - onto the valve stem to prevent damage to the new valve stem oil seal - B -.
-
Oil the sealing lip of the valve stem oil seal - B -, insert into the (3365) and carefully slide onto the valve guide.
-
Remove the plastic sleeve - A -.
-
Install the valve spring and valve spring retainer.
-
Install the (VAS 5161) as shown.
Intake Side