Jetta Sedan L5-2.5L (CBTA) (2009)
Exhaust Manifold: Service and Repair
Exhaust Manifold Assembly Overview
1
Gasket
‹› Always replace.
2
Nut, 25 Nm
‹› Always replace.
3
Exhaust manifold
‹› Coat the stud bolts in the cylinder head with hot bolt paste (G 052 118 A3).
‹› Remove upward.
4
Clip
5
Heat shield
6
Bolt, 10 Nm
7
Heated Oxygen Sensor (HO2S) (G39), 55 Nm
‹› Only use hot bolt paste (G 052 118 A3) to grease the threads ; do not let the hot bolt paste (G 052 118 A3) get onto the slits of the sensor
body.
‹› Use the ring spanner 7 piece set (3337) for removal and installation.