Jetta Sedan L5-2.5L (CBTA) (2009)
Continuation for All
-
Loosen the bolts for the clamp - 1 -. The front crossmember must not be removed.
‹› The flex joint in the front exhaust pipe must not be bent more than 10 degrees, otherwise it may be damaged.
-
Remove the nuts - 2 - for the front exhaust pipe to exhaust manifold and remove the bolts - 3 -.
-
Remove the front exhaust pipe - 1 - with catalytic converter from the exhaust manifold, slide toward the front at sides and guide under the front
crossmember.