Jetta Sedan L5-2.5L (CBTA) (2009)
-
Remove bolts (22 Nm ± 1 Nm) - 1 - from A/C compressor and disconnect refrigerant lines from A/C compressor.
-
Remove hex screws (25 Nm) - 2 - and remove A/C compressor.
Installing
-
Install in reverse order of removal, noting the following:
‹› Ensure alignment bushings - 3 - are seated correctly.
‹› Prior to operating compressor after installation, observe notes --> [ After Installing A/C Compressor ] See: Description and Operation/After
Installing A/C Compressor