Jetta Sedan L5-2.5L (CBTA) (2009)
/Page-1613002.png)
-
Press and turn plastic hex head out of headlamp housing to break out assembly opening.
‹› The locking piece broken out must not remain in headlamp. Remove it from headlamp housing if necessary.
-
Remove bolts - 2 - and - 3 - (SW T20) from Headlamp Beam Adjusting Motor - 1 -.
-
Raise low beam reflector - 2 - slightly and rotate Headlamp Beam Adjusting Motor - 1 - in - direction of arrow - as far as stop.
-
Raise low beam reflector slightly and pivot positioning motor ball head - 1 - so that it can slide back in - direction of arrow - out of ball head
mount - 2 -.
