Jetta Sedan L5-2.5L (CBTA) (2009)
Hazard Warning Switch: Service and Repair
Instrument Panel Lamps and Switches
Emergency Flasher Switch
CAUTION!
‹› Turn off the ignition and all electrical consumers.
‹› Remove ignition key.
‹› When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool
(trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.
Removing
-
Remove the center vent.
-
Disconnect connectors - arrows -.
-
Disengage retaining tabs - arrows - and remove the Emergency Flasher Switch (E3).
Installing
Install in reverse order of removal.