Jetta Sedan L5-2.5L (CBTA) (2009)
Drive Belt: Service and Repair
Ribbed Belt
Ribbed Belt
Special tools, testers and auxiliary items required
‹› Release tool (T10060A)
Removing
-
Remove the noise insulation..
-
Remove the front section of the right front wheel housing liner.
Ribbed Belt for the Air Conditioning (A/C) Compressor
-
Mark the direction of rotation of the ribbed belt.
-
Rotate the tensioner - 1 - as shown using a 15 mm box end wrench - A - in - direction of arrow - and secure using the (T10060A).
-
Remove the A/C compressor ribbed belt.
Ribbed Belt for the Generator and Coolant Pump
-
Relieve the tension on the tensioner - 1 - for the A/C compressor ribbed belt and remove the (T10060A).
-
Mark the running direction of the generator and coolant pump ribbed belt.
-
Insert the (T10060A) into the tensioner - 2 -.