Jetta Sedan L5-2.5L (CBTA) (2009)
The ATF temperature should not be more than approx. 30°C at start of test.
‹› Transmission not in emergency running mode; ATF temperature not above approximately 30 °C.
‹› Vehicle must be standing level
‹› Selector lever in "P".
-
Connect tester and continue switching until it is ready for operation --> [ Vehicle Diagnosis, Testing and Information System VAS 5051,
Connecting ] See: Powertrain Management/Transmission Control Systems/Testing and Inspection/Scan Tool Testing and Procedures.
-
Press right Guided Functions.
-
Then select vehicle, transmission and Check ATF level.
-
Press ->.
-
Start engine.
-
Raise vehicle.