Jetta Sedan L5-2.5L (CBTA) (2009)
Fluid - M/T: Service and Repair
Gear Oil, Draining
Gear Oil, Draining
Use a clean container (3.0 L capacity) with scale to collect gear oil.
‹› Shift rod is secured --> [ Secure shift rod as follows: ] See: Transmission and Drivetrain/Manual Transmission/Transaxle/Service and
Repair/Procedures
-
Drain gear oil by removing oil drain plug - arrow 1 - and then removing journal - arrow 2 -.
-
Install journal - arrow 2 - with new O-ring --> [ 7 Bolt, 25 Nm ] See: Transmission and Drivetrain/Manual Transmission/Transaxle/Service and
Repair/Overhaul/Transmission Housing and Shift Mechanism
-
Install oil drain plug - arrow 1 - --> [ (item 17) Oil drain plug, 30 Nm ] See: Transmission and Drivetrain/Manual Transmission/Transaxle/Service
and Repair/Overhaul/Transmission Housing and Clutch Housing, Servicing
-
Now rotate angle - A - back into initial position in direction of - arrow - to let shift rod move freely again