Jetta Sedan L5-2.5L (CBTA) (2009)
Checking internal resistance
-
Disconnect the Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130) electrical harness connector - arrow -.
-
Using a multimeter, check the Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130) electrical harness connector terminals
1 to 2 for resistance.
Specified value: 2.5 to 14.0 ohms (at approx. 20 °C)
If the specification was not obtained:
-
Replace the Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130)