Jetta Sedan L5-2.5L (CBTA) (2009)
Glow Plug: Service and Repair
Glow Plug Connectors
Special tools, testers and auxiliary items required
‹› Pliers (3314)
Removing
CAUTION!
Before removing the glow plug connectors, note the different installation depths for the glow plugs in each cylinder.
-
Position the (3314) with the groove - arrow A - on the upper edge of the connector - arrow B - and press together lightly.
CAUTION!
Position the pliers so they do not touch or damage the wire.
Only use the tool shown.
Other tools may be unsuitable and could damage the connector.
If the connector is damaged during removal, the entire wiring harness including the connector must be replaced. A connector cannot be
replaced separately.
-
Carefully pull the connector off the glow plug in the direction of the arrow with the (3314).