Jetta Sedan L5-2.5L (CBTA) (2009)
/Page-464005.png)
‹› Key must be located in "Drive" position.
Key positions of lock cylinder:
1
Position "Off"
2
Position "Run"
3
Position "Start"
-
Install all components in reverse order of removal.
Ignition Key Removal Lock Solenoid
Ignition Key Removal Lock Solenoid (N334) is installed in the immediate vicinity of ignition/starter switch.
‹› To remove ignition key in vehicles with automatic transmission, always shift selector lever into position "P" and then switch off ignition.
Otherwise, Ignition Key Removal Lock Solenoid (N334) prevents ignition key from being removed!
Removing
-
Remove Steering Column Electronic Systems Control Module (J527). Refer to --> [ Steering Column Electronic Systems Control Module ] See:
Lighting and Horns/Sensors and Switches - Lighting and Horns/Combination Switch/Service and Repair/Steering Column Switches.
-
Release locking device - 2 - using a suitable screwdriver.
