Jetta Sedan L5-2.5L (CBTA) (2009)
Alarm Module: Service and Repair
Towing Recognition Control Module
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1783)
CAUTION!
‹› Turn off the ignition and all electrical consumers.
‹› Remove ignition key.
Removing
-
Remove luggage compartment left side trim.
-
Disconnect the connectors - 2 - from the towing recognition control module (J345).
‹› The number of towing recognition control module harness connectors can deviate from the illustration depending on vehicle equipment.
-
Remove mounting bolts - 1 - and remove towing recognition control module with bracket out of vehicle.
-
Remove mounting bolts - arrows - and remove towing recognition control module from bracket.
Installing
Install in reverse order of removal, noting the following: