volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 4883 > < Procedures|Page 4881
Page 13
background image

To install, perform the steps used for removal in reverse order.

-

Switch on ignition.

CAUTION!
Make sure that no persons are in the vehicle.

-

Connect vehicle battery..

Rear Side Airbag

Airbags

Rear Side Airbag

‹› Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the

same manner.

Removing

CAUTION!
Observe safety precautions for working on airbags. Refer to --> [ Airbag Safety Precautions ] See: Service Precautions.

-

Disconnect vehicle battery. 

-

Remove side upholstery with side airbag - 1 -. Refer to --> [ Side Upholstery with Side Airbag ] See: Body and Frame/Seats/Service and
Repair/Rear Seats.

-

Remove the two bolts - 2 - (9 Nm).

‹› Bolts are microencapsulated and must be replaced after each loosening. 

‹› Before installing the new bolts, the threads of the corresponding nuts must be cleaned.

-

Remove connector coupling of rear side airbag - 3 - from mount in side upholstery - 1 -.

-

Remove rear side airbag - 3 - from side upholstery. 

Procedures|Page 4883 > < Procedures|Page 4881