Jetta Sedan L5-2.5L (CBTA) (2009)
-
Remove the wiring harness retaining tab - 1 - from the threaded pins - 4 - in the - direction of arrow -.
-
Remove connector - 3 - from crash sensor - 2 -.
-
Remove the two bolts - 5 - (9 Nm) and the crash sensor - 2 -.
Installing
To install, perform the steps used for removal in reverse order.
-
Switch on ignition.
CAUTION!
Make sure that no persons are in the vehicle.
-
Connect vehicle battery..