Jetta Sedan L5-2.5L (CBTA) (2009)
Impact Sensor: Service and Repair
Crash Sensors
--> [ Front Door Crash Sensors ]
--> [ Rear Wheelhousing Crash Sensors, Sedan ]
--> [ Rear Wheelhousing Crash Sensors, Wagon ]
Front Door Crash Sensors
‹› Removal and installation is described for the right-hand side of the vehicle. Removal and installation for the left-hand side is performed in the
same manner.
Removing
CAUTION!
Observe safety precautions for working on airbags.
All vehicles
-
Disconnect vehicle battery.
-
Remove outer door plate.
-
Separate wiring harness - 1 - from crash sensor - 3 -.
Vehicles with bolted crash sensors
-
Remove the two bolts - 2 - (2.5 Nm) and the crash sensor - 3 -.