Jetta Sedan L5-2.5L (CBTA) (2009)
-
Pull Ignition Key Removal Lock Solenoid (N334) - 1 - in direction of arrow out of its mount.
-
During this, harness connector is simultaneously disconnected.
Installing
-
Install in reverse order of removal, noting the following:
‹› After connecting the battery, perform output Diagnostic Test Mode (DTM) to activate the Ignition Key Removal Lock Solenoid (N334). Refer to
--> [ Steering Column Electronic Systems Control Module, Output Diagnostic Test Mode ] See: Relays and Modules/Relays and Modules -
Steering and Suspension/Relays and Modules - Steering/Steering Column Control Module/Testing and Inspection/Initial Inspection and Diagnostic
Overview.