Jetta Sedan L5-2.5L (CBTA) (2009)
‹› For reasons of clarity, illustration does not show turn signal switch and windshield wiper switch. Switches must not be removed when removing
lock cylinder.
‹› The Anti-Theft Immobilizer Reading Coil (D2) is attached to the lock cylinder and cannot be replaced separately.
-
Disconnect the connector - arrow - on the Anti-Theft Immobilizer Reading Coil (D2).
-
Insert ignition key into lock cylinder and turn it into position " Drive".
Key positions of lock cylinder:
1
Position "Off"
2
Position "Run"
3
Position "Start"
‹› For reasons of clarity, the following illustration depicts lock cylinder as removed and without ignition key.