Jetta Sedan L5-2.5L (CBTA) (2009)
Install in reverse order of removal, noting the following:
-
Tighten all fasteners to specified values. Refer to --> [ Starter Tightening Specifications ] See: Specifications.
Starter, 2.0L TDI and Manual Transmission
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
‹› Torque Wrench (V.A.G 1332)
‹› Spring-type clip pliers (VAS 5024)
CAUTION!
When disconnecting and connecting battery, the procedure must be followed as described in the Repair information. Refer to --> [
Battery, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal and Replacement/Battery, Disconnecting and
Connecting.
Removing
-
Disconnect the battery. Refer to --> [ Battery, Disconnecting and Connecting ] See: Battery/Service and Repair/Removal and
Replacement/Battery, Disconnecting and Connecting.
-
Pull engine cover upward - arrows A - and forward - arrow B -.
-
Disconnect harness connector - 1 - and loosen spring-type clamp - 2 - using (VAS 5024).