Jetta Sedan L5-2.5L (CBTA) (2009)
CAUTION!
Do not use other grease under any circumstances.
For this purpose, turn the steering gear to the stop toward both sides in succession.
For a clearer illustration, the steering gear has been removed in the illustration.
-
Remove the clamp on the other side of the steering gear and remove the boot from the steering gear housing.
-
Grease the steering gear on the toothed side - A - and on the thrust piece side with grease (G 052 192 A1).
-
Turn the steering wheel into the straight ahead position.
-
Guide the new clamp and boot onto the tie rod.
-
Install the tie rod until the marking applied during removal is reached.
-
Tighten the lock nut - 3 - to specification, counter hold on the tie rod end - 2 - while doing this.
-
Slide the boot - 2 - onto the tie rod - 1 - as depicted in the illustration.