Jetta Sedan L5-2.5L (CBTA) (2009)
‹› Always replace after removal.
17
Bolt, 20 Nm + 90° additional turn
‹› Always replace after removal.
18
Bolt, 70 Nm + 90° additional turn
‹› M12 x 1.5 x 75.
‹› Always replace after removal.
19
Bolt, 100 Nm + 90° additional turn
‹› M14 x 1.5 x 70.
‹› Only tighten if the pendulum support is bolted to the transmission.
‹› Always replace after removal.
20
Underbody protection bracket
21
Bolt
Always pay attention to the bolt size and strength class. There are different tightening specifications.
‹› M10 x 75 strength class 8.8: 40 Nm + 90° additional turn
‹› M10 x 75 strength class 10.9: 50 Nm + 90° additional turn
CAUTION!
From MY 2008, Heli-coil inserts are installed in the threads for the pendulum support threaded connection in the 02Q manual
transmissions.
On these and all other transmissions, use strength class 10.9 bolts.
If, in the 02Q manual transmission, there is not a Heli-coil insert, then use 8.8 strength class bolts and the appropriate tightening
specification.
‹› Always replace after removal.
22
Bolt
Pay attention to the bolt strength class. There are different tightening specifications.
‹› M10 x 35 strength class 8.8: 40 Nm + 90° additional turn
‹› M10 x 35 strength class 10.9: 50 Nm + 90° additional turn
CAUTION!
From MY 2008, Heli-coil inserts are installed in the threads for the pendulum support threaded connection in the 02Q manual
transmissions.
On these and all other transmissions, use strength class 10.9 bolts.
If, in the 02Q manual transmissions, there is not a Heli-coil insert, then use 8.8 strength class bolts and the appropriate tightening
specification.
‹› Always replace after removal
23
Bracket on pendulum support
‹› No replacement part.
24
Pendulum support