Jetta Sedan L5-2.5L (CBTA) (2009)
End of spring - arrow - must rest against the stop of the lower spring support.
-
Install the spring together with the spring seat.
-
The lower spring support has a pin.
-
Insert this pin into the hole of the lower transverse link - arrow -.
-
Then insert the spring seat at the top into the upper spring end.
-
Release tension of spring, guiding the upper spring support onto the tab of body.
-
Remove the spring compressor.
-
Install the wheel and tighten. Refer to --> [ Wheel Bolt Tightening Specification ] .