Jetta Sedan L5-2.5L (CBTA) (2009)
-
Remove oil pan together with gasket.
Installing
Install in reverse order of removal. During this step, observe the following:
-
Clean two magnets in recesses of oil pan. Ensure that magnets are seated correctly in pan.
-
Install oil pan with new gasket.
-
Ensure that oil pan gasket is seated correctly.
-
Lines must not become trapped when positioning oil pan.
-
Tighten pan bolts - arrows - diagonally in several stages to specification: --> [ Tightening Specifications ] See: Specifications/Mechanical
Specifications/09G Transmission (6 Speed A/T)/Tightening Specifications.