Jetta Sedan L5-2.5L (CBTA) (2009)
Shifter A/T: Procedures
Selector Mechanism Assembly Overview
Selector Mechanism Assembly Overview
1
Selector cover with knob
‹› Do not remove knob without reason. For emergency release, only the cover needs to be unclipped --> [ Selector Lever Emergency Release ]
See: Shift Interlock/Service and Repair.
‹› Before removing handle, pull button out past its rest position and secure it with a cable tie or appropriate wire. This will prevent the button
from being accidentally pressed into the knob.
‹› If button is pressed into removed handle
-
Before installing knob, pull out button past felt pressure point.
‹› To release shift lever handle lock push upward on locking sleeve at bottom of shift lever handle.
2
Selector mechanism with selector lever
‹› Removing and installing --> [ Selector Mechanism with Selector Lever ] See: Removal and Replacement
3
Bolt with spring
‹› 3 Nm
4
Pin