Jetta Sedan L5-2.5L (CBTA) (2009)
3
Overflow tube
‹› Remove to drain ATF
‹› Tightening specification: --> [ Tightening Specifications ] See: Specifications/Mechanical Specifications/09G Transmission (6 Speed
A/T)/Tightening Specifications.
4
Oil pan
‹› Removing and installing --> [ ATF Oil Pan ] See: Fluid Pan/Service and Repair
5
Bolt
‹› Tighten oil pan bolts diagonally in several stages
‹› Tightening specification: --> [ Tightening Specifications ] See: Specifications/Mechanical Specifications/09G Transmission (6 Speed
A/T)/Tightening Specifications.
6
Seal
‹› Always replace
7
Magnet
‹› Qty. 2 in depressions in pan
‹› Clean before installing
8
Bolt
‹› For securing valve body in transmission
‹› Qty. 12, various lengths --> [ Loosen valve body fastening bolts , and diagonally
and carefully remove valve body. ] See: Service and Repair
‹› Always replace bolts
‹› Tightening specification: --> [ Tightening Specifications ] See: Specifications/Mechanical Specifications/09G Transmission (6 Speed
A/T)/Tightening Specifications.
9
Bolt
‹› Qty. 3
‹› For securing strainer to valve body
‹› Tightening specification: --> [ Tightening Specifications ] See: Specifications/Mechanical Specifications/09G Transmission (6 Speed
A/T)/Tightening Specifications.
10
ATF strainer
‹› Removing and installing --> [ ATF Strainer ] See: Fluid Filter - A/T/Service and Repair
11
Automatic Transmission Hydraulic Pressure Sensor 1 (G193)
‹› Not installed in all transmissions
12
Automatic Transmission Hydraulic Pressure Sensor 2 (G194)
‹› Not installed in all transmissions
13
Valve body
‹› Removing and installing --> [ Valve Body ] See: Service and Repair