Jetta Sedan L5-2.5L (CBTA) (2009)
-
Route wiring harness - 1 - as shown in figure.
-
Join connectors - 2 - and - 5 -.
The mating part of connectors must bear the same identification as respective connector itself.
-
Place bracket onto ATF temperature sensor (G93) - 7 -.
-
Insert ATF temperature sensor (G93) in valve body together with bracket.
-
Tighten bolt - 6 - to specification: --> [ Tightening Specifications ] See: Specifications/Mechanical Specifications/09G Transmission (6 Speed
A/T)/Tightening Specifications.
-
Join connectors to automatic transmission hydraulic pressure sensors - 1 - and - 4 -.
-
Tighten bolts - 3 - for connector retainers - 2 - and - 5 -; specification: --> [ Tightening Specifications ] See: Specifications/Mechanical
Specifications/09G Transmission (6 Speed A/T)/Tightening Specifications.