Jetta Sedan L5-2.5L (CBTA) (2009)
‹› Removing and installing --> [ Left Flange Shaft Seal, Replacing ] See: Seals and Gaskets/Service and Repair/Left Flange Shaft Seal, Replacing
14
Spring for flange shaft
‹› Installed behind flange shafts
15
Thrust washer
‹› Installation position --> [ Installation position of thrust washer for tapered ring ]
16
Tapered ring
‹› With grooves to engage thrust washer
‹› Installation position: Taper toward differential housing
17
Securing ring
‹› Holds tapered ring, thrust washer and compression spring in position with flanged shaft removed
18
Thrust washer union
‹› Install coated with gear oil
‹› On some transmissions, the thrust washer union was made with a ridge --> [ On some transmissions the thrust washer union was made with a
ridge in the area of the holes. ]
19
Large differential bevel gear
‹› Installing --> [ Differential bevel gears and differential bevel gear axle, installing ]
20
Threaded piece
‹› Installing --> [ Differential bevel gears and differential bevel gear axle, installing ]
21
Differential planetary gear axle
‹› Removing, in conjunction with a short spring pin --> [ Spring pin with surrounding groove (short spring pin): removing and installing ]
‹› Removing, in conjunction with a long spring pin --> [ Removing spring pin without surrounding groove (long spring pin): Press out differential
bevel gear axle. ]
‹› Installing --> [ Differential bevel gears and differential bevel gear axle, installing ]
22
Spring pin
‹› For securing axle for differential bevel gears
‹› Different lengths of spring pins are installed
‹› Differentiating the spring pins --> [ Differentiating the spring pins ]
‹› Short spring pin: removing and installing --> [ Spring pin with surrounding groove (short spring pin): removing and installing ]
‹› Long spring pin: sheared off at removal --> [ Removing spring pin without surrounding groove (long spring pin): Press out differential bevel
gear axle. ]
‹› Long spring pin: Installing --> [ Spring pin without surrounding groove (long spring pin), installing ]
23
Small differential bevel gear
‹› Installing --> [ Differential bevel gears and differential bevel gear axle, installing ]
24
Large differential bevel gear