Jetta Sedan L5-2.5L (CBTA) (2009)
-
Remove retaining disc from shift cable - A - and selector cable - B -.
To do this, lift up retainer using a screwdriver - arrow 1 - and press off locking washer - arrow 2 -.
-
Remove shift cable - A - from shift lever mount.
-
Remove selector cable - A - from selector elbow mount.
Removing and installing lock washer
-
To remove and install lock washer - arrow A -, push spacer bushing - arrow B - to stop with a screwdriver in direction of - arrow C - and pull off
lock washer.
‹› Do not tilt bushing when pushing down.
‹› Groove in shift lever for lock washer must be visible.
‹› Carefully release tension on spring.
Installing spring