Jetta Sedan L5-2.5L (CBTA) (2009)
-
Bond flange - 2 - all around with fabric reinforced adhesive tape.
-
Cut through adhesive sealing material (with glass residue) from window opening using electric cutter (V.A.G 1561 A) and cutting blade, bent at
right angle (V.A.G 1561/10) (with stopper roll).
CAUTION!
Always wear protective goggles and leather gloves.
Rear window, installing
Preparing undamaged window for glazing. Refer to --> [ Undamaged Window, Preparing for Glazing ] See: Service and Repair/Flush Bonded
Windows Overview
Preparing new window for glazing. Refer to --> [ New Window, Preparing for Glazing ] See: Service and Repair/Flush Bonded Windows Overview
Preparing window flange for glazing. Refer to --> [ Window Flange, Preparing for Glazing ] See: Service and Repair/Flush Bonded Windows
Overview
Installation notes. Refer to --> [ Installation Information ] See: Service and Repair/Flush Bonded Windows Overview
Minimum curing time. Refer to --> [ Minimum Curing Time ] See: Service and Repair/Flush Bonded Windows Overview