Jetta Sedan L5-2.5L (CBTA) (2009)
/Page-1677002.png)
All Vehicles
-
Pull cutting cord - 1 - through adhesive sealant at place shown in picture into vehicle interior at lower area of rear window using awl (V.A.G
1474/2) from separating device for bonded windows (V.A.G 1474 A).
-
Insert cutting cord - 3 - into window flange behind seal by aid of small tube - 1 -.
-
Secure a cord end - 2 - to the Pull Handle (V.A.G 1351/1) - 3 - to counter hold.
-
Pull other end of cutting cord into interior.
