Jetta Sedan L5-2.5L (CBTA) (2009)
Windshield Washer Hose: Service and Repair
Ridged Hoses, Repairing
Ridged Hoses, Repairing
Special tools, testers and auxiliary items required
-
Hot air blower VAS 5179 or
-
Hot air blower V.A.G 1416/ or
-
Heat gun VAS 1978/14
NOTE:
-
Area to be repaired must but be under stress of stretching or bending.
-
If damaged area is longer than 20 mm, a new section of corrugated hose must be obtained, and two sets of adapters inserted using following the
following procedure.
-
Trim and remove damaged sections of hose.
-
Select corresponding connection pieces - 2 - and - 3 - as well as corresponding heat-shrink sleeves.
-
Carefully warm end of hose - 1 -.
-
Insert repair adapter - 2 - into hose - 2 - - arrow A
-
Carefully warm end of hose - 4 -.
-
Insert repair adapter - 3 - into hose - 4 - - arrow B