Jetta Sedan L5-2.5L (CBTA) (2009)
Wiper Arm: Service and Repair
Rear Window Wiper Arm
Rear Window Wiper Arm
Removing
-
Switch rear window wiper on and off again with ignition on in order to drive wiper arm into the end position.
-
Flip up cover - 1 - on rear window wiper and unclip.
-
Loosen nut - arrow -, without completely removing.
‹› Aero wiper blades are very flexible. Grasp wiper blade only in area of wiper blade mount to lift them off rear window.
-
Fold up wiper arm and remove from cone moving it sideways.
-
Remove the nut - arrow - and remove wiper arm.
Installing
-
To bring the Rear Window Wiper Motor (V12) into the end position, switch the rear window wiper on and off again while the ignition is switched
on.
-
Insert wiper arm on wiper arm shaft at approximate rest position and hand-tighten nut - arrow -.
-
Set rest position of rear window wiper. Refer to --> [ Rear Window Wiper Blade Park Position, Adjusting ] See: Adjustments/Rear Window Wiper
Blade Park Position, Adjusting.