Jetta Sedan L5-2.5L (CBTA) (2009)
Wiper Motor: Service and Repair
Windshield Wiper Motor, Removing From Wiper Frame
Windshield Wiper System
Windshield Wiper Motor, Removing from Wiper Frame
Procedure
-
Pry off ball head - arrow - of linkage - 1 - from motor crank using pry lever (80-200).
-
Remove the nut - 1 -.
-
Remove motor crank - 2 - from wiper motor shaft.
-
Remove the mounting bolts - arrows - and remove the Windshield Wiper Motor (V) with the Wiper Motor Control Module (J400) from the wiper
frame.