Jetta Sedan V6-2.8L (BDF) (2003)
Muffler: Service and Repair
Muffler with mountings
1. From catalytic converter
2. Marking
3. Flat round head bolt
4. Double clamp
^
Replace
^
Observe installation position
5. M8: 25 Nm, M10: 40 Nm
6. Support element/mounting
^
Observe installation position
7. Forward muffler
^
As standard, forward muffler and rear muffler are installed as a single component. In repair cases forward muffler and rear muffler are supplied
individually with a double clamp for connecting together.
^
Aligning forward muffler parallel, Refer to Fig. 4
^
Separating points, Refer to Fig. 4
^
Aligning exhaust system, Refer to Exhaust System, Adjustments
8. Support element/mounting
9. Rear muffler
^
As standard, forward muffler and rear muffler are installed as a single component. In repair cases forward muffler and rear muffler are supplied
individually with a double clamp for connecting together.
^
Separating points
^
Observe installation position of end pipe
10. Support element/mounting
11. Tunnel bridge
^
With hole to align exhaust system
^
Aligning exhaust system, Refer to Exhaust System, Adjustments