Jetta Sedan V6-2.8L (BDF) (2003)
Flex Plate: Service and Repair
Drive plate, removing and installing
Special tools and equipment
^
T10069 Counter support
^
VAG 1332 Torque wrench (40 200 Nm)
^
Depth gauge
^
Straight edge
Removing
-
Remove drive plate. To do this, hold vibration damper with counter support T1 0069.
-
Loosen drive plate securing bolts using cross-over sequence and remove them.
-
Remove drive plate.
Installing
-
Position drive plate on crankshaft
-
Insert at least 3 old bolts and tighten to 30 Nm.