Jetta SportWagen L4-2.0L DSL Turbo (CBEA) (2009)
![background image](/volkswagen/jetta_sportwagen/l4-2.0l_dsl_turbo_(cbea)/Page-1312001.png)
Front Subframe Mount: Adjustments
Engine Subframe Mount, Checking Adjustment
Engine Subframe Mount, Checking Adjustment
‹› There must be a distance - a - of at least 10 mm between the engine bracket and right longitudinal member.
‹› The casting edge on the engine bracket - 2 - must be parallel to the support arm - 1 -.
-
If the conditions are not met, then adjust the subframe mount --> [ Subframe Mount, Adjusting ] See: Engine, Cooling and Exhaust/Engine/Drive
Belts, Mounts, Brackets and Accessories/Engine Mount/Adjustments/Subframe Mount, Adjusting.