Jetta SportWagen L4-2.0L DSL Turbo (CBEA) (2009)
Sun Shade: Service and Repair
Panorama Sunroof Sun Shade
Panorama Sunroof Sun Shade
Removing
-
Move the sun shade all the way into the open position.
NOTE: Using a hex socket head wrench, rotate shade motor into open direction to removal position if the electrical system malfunctions.
-
Remove the rear glass sunroof panel.
-
Remove the screws - 3 - from the cap - 2 - (2 Nm).
-
Unclip the cap retainer - arrow - - 2 - from the rear lid using a screw driver - 4 - and fold the cap - 2 - up.
Do not remove the inner seal - 1 -.
-
Carefully lift the shade arch - 2 - together with the sun shade slide - 1 -.
NOTE: Be sure not to damage the shade material - 3 -.
-
Pull the sun shade slide - 1 - to the side in the direction of the - arrow - out of the sun shade arch - 2 -.
-
Remove the headlines.
-
Remove the screws - 1 - for the shade cartridge - 2 - (3.5 Nm).
-
Pull the sun shade cartridge - 2 - in the direction of the - arrow - slightly downward so that it can get past the sun shade motor - 3 -.
