Jetta SportWagen L4-2.0L DSL Turbo (CBEA) (2009)
Headlamp Alignment Actuator: All Technical Service Bulletins
Lighting - HID Headlamp DTC's 01534 Or 01535
94 09 08
Aug. 26, 2009
2018625, Supersedes T.B. Group 94 number 08-04 dated Sept. 17, 2008 to update warranty detail.
Vehicle Information
Condition
High Intensity Gas Discharge Lamp (HID) Range Control Motor Replacement for Fault 01534 or 01535
Technical Background
When repairing auto leveling system for faults 01534 or 01535 - Range control adjustment motor failure, it is not necessary to replace headlight
assembly.
NOTE:
-
If entire headlight is replaced for Range control adjustment motor, the claim is subject to debit if it is determined the headlight is not the causal
part.
-
All GFF test plan documentation is required for headlight wiring and connector failures, or adjustment motor replacement.
Production Solution
No production change required.
Service
Checking Headlight Internal Wiring
-
Remove headlight assembly.
-
Inspect wiring and connectors at range control motor 4 pin connector and headlight 12 pin connector.
-
Test for open or shorted wiring between motor connector and headlight connector using a D.V.O.M ( Figure 1) and repair as necessary.
a. Pin 1 to 1
b. Pin 2 to 2
c. Pin 3 to 3
d. Pin 4 to 4
Xenon Headlight Range Control Motor Replacement
NOTE: (Headlights built by Hella or Visteon have twist lock adjustment motors and DO NOT require the following procedure.)
-
Prepare headlight for range control motor removal. (For Automotive Lighting type headlights.)