Jetta SportWagen L4-2.0L DSL Turbo (CBEA) (2009)
-
Rotate camshaft sprocket and high pressure fuel pump toothed belt sprocket clockwise in their slots as far as the stop.
-
Lay the toothed belt on the crankshaft sprocket, tensioning roller, camshaft sprocket, coolant pump toothed belt sprocket and high pressure fuel
pump toothed belt sprocket.
-
Lay toothed belt on the tensioning roller last.
-
Loosen tensioning roller nut and remove the locking pin (T10265).
‹› Make sure the tensioning roller is properly positioned in the rear toothed belt guard - arrow -.
-
Carefully rotate tensioning roller eccentric pulley clockwise with the special wrench, long reach (T10264) until the indicator is centered in the base
plate gap - 2 -.