Jetta SportWagen L4-2.0L DSL Turbo (CBEA) (2009)
-
Remove the windshield wiper arm and the plenum chamber cover. Refer to --> [ Windshield Wiper System ] See: Wiper and Washer
Systems/Service and Repair/Removal and Replacement.
-
Remove the plenum chamber bulkhead.
The following illustration shows the wiring harness as viewed from the windshield with the hood open.
1. Plenum Chamber Bulkhead
2. Wiring harness
3. Front window
-
Unclip the wiring harness - 2 - from the retainers - arrows -.
-
Remove the mounting bolt - 1 - and nut - 2 - of plenum chamber bulkhead - 3 -.