Jetta SportWagen L4-2.0L DSL Turbo (CBEA) (2009)
![background image](/volkswagen/jetta_sportwagen/l4-2.0l_dsl_turbo_(cbea)/Page-627002.png)
Note
Tip:
The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed
if there is no confirmation response to support the claim.
For further update instructions and troubleshooting, refer to SVM Technical Bulletin Instance 2014603, in ElsaWeb.
^
Update the Engine Control Module using the SVM action code as listed in the table.
Tip:
The procedure can be found in GFF under Functions/ Component Selection, Software Version Management, Adjust Software.
Note
Current Tuned ECM or TCM requirements: If you encounter a vehicle with a "Tuned" ECM or TCM, your dealership must do the following before
performing any procedure that updates ECM or TCM programming:
^
Notify the owner that their ECM or TCM was found to have been tuned
^
Notify the owner any damage caused by the tuning of the ECM or TCM (including any adverse emissions consequences) will not be covered by
Volkswagen Group of America warranties.