Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Front Door Exterior Handle: Service and Repair
Door Handle
Front Door
Door Handle
‹› Removing and installing is described only for the right door handle. Removing and installing the left door handle is derived from this.
Removing
-
Remove housing. Refer to --> [ Housing ]. See: Service and Repair/Housing
-
Pry out clip - 2 - from door handle - 1 -.
-
Swivel door handle - 1 - out of door - arrow -.
Installing
-
Guide assembly tool (T10118) into door through opening in outer door panel.
-
Light the inner part of door using a flashlight for better view.
-
Hook assembly tool (T10118) into spring - arrow A -.
-
Engage spring into door lock by pulling assembly tool (T10118) - arrow B -.
Release lever is now locked in position.
‹› Lock is secured by engaging spring in the operating lever. This prevents the cable from subsequently being clipped in at door handle incorrectly.